NEC Express5800 320La - Page 182

5-28 Problem Solving
Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message Description Action
0C00
Rompilot reports error number
xx
•
Configuration error in
SETUP.
•
CPU/PCI module board is
faulty.
•
Re-configure Rompilot.
•
Replace the CPU/PCI module
board.
Expansion ROM not initialized Configuration error in Setup
menu.
•
Disable the ROM Expansion
for unnecessary options.
Invalid System Configuration Data
•
Configuration error in
Setup menu.
•
CPU/PCI module board is
faulty.
•
Specify "Yes" for Reset
Configuration Data to clear the
configuration.
•
Replace the CPU/PCI module
board.
NOTICE:
Your System Redundant Power Supply is not
configured
•
SMBus device is faulty.
•
SMBus is faulty.
•
Check cable connection.
•
Replace the cable.
•
Replace the CPU/PCI module
board.
Resource Conflict Configuration error in Setup
menu.
•
Re-configure the device
configuration using SETUP.
System Configuration Data Read error
System Configuration Data Write error
•
Configuration error in
Setup menu.
•
CPU/PCI module board is
faulty.
•
Specify "Yes" for Reset
Configuration Data to clear the
configuration.
•
Replace the CPU/PCI module
board.
Warning: IRQ not configured Configuration error in Setup
menu.
•
Reconfigure using SETUP.