NEC Express5800 320La - Page 84

3-24 Configuring Your System
Table 3-2 lists the System Jumpers and their factory default settings.
!
CAUTION
DO NOT change any other switch jumper settings. Any
change may cause the server to fail or malfunction.
Table 3-2. System Jumper Summary
Jumpers Function
Jumper On/Off
(default in bold) What it does at system reset.
1–2 CMOS clear*
Off, Protect
On, Erase
Preserves the contents of CMOS.
Clears CMOS.
3–4 Password disable
Off, Enable
On, Disable
Enables password protection.
Disables the password.
5–6 Reserved
Off, Not Used
Reserved. Do Not Change.
7–8 Reserved
Off, Not Used
Reserved. Do Not Change.
9–10 Reserved
Off, Not Used
Reserved. Do Not Change.
11–12 Spare Off, Not Used
On, Spare
Provides a spare jumper.
*Clearing CMOS returns the system to its factory default settings.