10
Checking the Supplied Items and the Names of the Projector Parts
12. PC control terminal (PC CONTROL-T) (D-Sub 9P)
A service person or an installer uses this terminal when setting data on the projector. Use a
commercially available RS-232C straight cable to connect the projector to a personal computer
(PC).
13. Ethernet port (LAN1, LAN2) (RJ-45)
Use this port when controlling your projector in LAN connection from a PC. Use a commercially
available LAN cable (10Base-T/100Base-T) to connect the projector to the PC.
To Next Page
Loading...
