7
No. Name Function
(1)
Handset Used for sending/receiving voice.
(2)
Back Key To return to previous window.
(3)
Speaker Originating a call with handsfree.
(4)
Dial Keypad Dial the called party number or feature access code.
(5)
Hold key To place a call on hold.
(6)
Transfer key
Allows the terminal user to transfer established calls to another terminal,
without attendant assistance.
(7)
Speaker Key (with light)
To control the built-in speaker which can be used for handsfree dialing or
monitoring.
(8)
Cursor Key
Enter key
To determine the selected item in the menu. Also, this key is used as
cursor-movement key on the local menu of the terminal.
This terminal has Shortcut Menu for frequently-used features. Use this
key to display the Shortcut Menu (Note: For only classic mode)
Volume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.
(Note: For only classic mode)
Left key (Redial)
Press this key to activate Redial feature. Press Redial and scroll back
through numbers that have been dialed. When the desired number is
display, press or to activate dialing.
(Note: For only Classic Mode)
(9)
Menu Key To access the menu of terminal.
(10)
Mic Key To respond handsfree. LED lights during speakerphone operation.
(11)
Feature Key (with light)
To activate features such as terminal setup and to program One-Touch
Speed Calling keys.
To Next Page
Loading...
Need help?
General