NEC ITK-8TCGX User Manual

40
1.
Making/Answering Calls with a
Headset
By Using An Optional Headset, It Is Possible To
Originate Or Respond To Calls.
When Using A Headset, The On-hook/off-hook
Operation Can Be Made Using Headset/handset
Feature Key.
Make a Call Using a Headset
While placing the handset on the terminal, make a call
using the headset.
(1) Press The Headset/handset Feature Key.
Headset/handset Feature Key Lamp Lights Red.
Line Key Lamp Lights Green.
(2) Dial A Desired Number.
(3) Start A Conversation After The Called Party
Answers.
(4) Press The Headset/handset Feature Key Once
Again, After Finishing A Call.
The Headset/Handset Feature Key lamp goes off.
The line key lamp light goes off.
Answer a Call Using a Headset
While placing the handset on the terminal, answer a call
using the headset.
(1) While hearing a ringing tone, press the Headset/
Handset feature key.
Feature key lamp lights red.
(2) Start conversation with the calling party.
(3) Press the Headset/Handset feature key once
again, after finishing a call.
The Headset/Handset feature key lamp goes off.
The line key lamp light goes off.
If the upload fails for reasons other than the
ones listed above, “Download Failed!” or
“Upload Failed!” displays.
Contact your system administrator.
The feature key is set with system data setting
at initial installation.
For details, contact your system administrator.
During a call in progress using the handset,
you can switch to the headset by pressing the
Headset/Handset feature key.
It is possible to answer a call by pressing line
key after pressing the Headset/Handset
feature key. You can also answer a call by
pressing the Answer key after pressing the
Headset/Handset feature key.
For details, contact your system administrator.

NEC ITK-8TCGX Specifications

General

Brand	NEC
Model	ITK-8TCGX
Category	Server
Language	English