NEC ITK-8TCGX User Manual

24
1.
Adjust Ringer Tone
It is possible to adjust the volume level of ringer tone
during incoming call arrival.
To adjust the volume, press UP or DOWN while the
telephone is ringing.
Setting Headset Ringing
Following explains how to enable/disable headset
ringing.
(1) Display the Menu screen, and select Settings.
(2) Select 1 (User Setting).
(3) Select 1 (Incoming Call).
(4) Select 2 (Headset Ring).
(5) Select whether to ring the headset ringer.
Setting Ringer Tone
This section explains how to set a ringer tone.
Distinctive Ringing Patterns to Distinguish
Internal and External Incoming Calls – Provided
When distinctive ringing patterns, which allow you to
distinguish internal and external incoming calls, are
provided you can leave the Ring Tone setting to
Automatic (default setting).
Distinctive Ringing Patterns to Distinguish
Internal and External Incoming Calls – Not
Provided
When distinctive ringing patterns, which allow you to
distinguish internal and external incoming calls, are not
provided you can set ringer tone using the steps listed
below.
(1) Display the Menu screen, and select Settings.
(2) Select 1 (User Setting).
(3) Select 1 (Incoming Call).
(4) Select
3 ( Ring Tone).
(5) Select 2
( Internal Call).
(6) Select the desired tone type.
This feature is required for both terminal and
system settings at initial installation. For
details, contact the system administrator.
Use each default ringer tone for both external
and internal incoming calls.
Ringing pattern is programmable on a system
basis.
For details, contact the system administrator.
Do not select 1 (External Call).
Ringing Tone , which is selected in 2 (Internal
Call), is applied to both external and internal
incoming calls.

NEC ITK-8TCGX Specifications

General

Brand	NEC
Model	ITK-8TCGX
Category	Server
Language	English