NEC MultiSync FP1350 - Page 48

5-7
ITEM 5-2) Basic Convergence ITEM 5-3) Area Convergence
The second OSM appears on the top center area when
TOP HORIZONTAL or TOP VERTICAL is selected, and,
it appears on the bottom center area when BOTTOM
HORIZONTAL or BOTTOM VERTICAL is selected.
ITEM 5-4) Corner Correction ITEM 5-5) Linearity
ITEM 5-6-1) GlobalSync 1 ITEM 5-6-2) GlobalSync 2
In case of TOP LEFT and BOTTOM LEFT, the left
arrow appears on the top left or the bottom left, and,
in case of TOP RIGHT and BOTTOM RIGHT, the
right arrow appears on the top right or the bottom
right.