NDA-24299 CHAPTER 4
Page 31
Revision 1.0
CHAPTER 4 INSTALLATION
This chapter covers the installation of the Fusion system. The following topics are covered:
• How to set switches on the following circuit cards:
PA-M96 (HUB)
PA-FCHA (FCH)
PA-24DTR (DTI)
• How to mount the circuit cards
• How to run the 10 BASE-T cables
1. Anti-Static Caution
This manual provides Static Caution indicators when describing work involving static-sensitive components.
When performing work accompanied by this mark, be sure to use the anti-static kit. Figure 4-1 shows the Static
Caution indicator.
Figure 4-1 Static Caution Indicator
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
To Next Page
Loading...
Need help?
General
