To Next Page

To Previous Page

5. Using On-Screen Menu

Setting up the Projector for a Wired LAN Connection [WIRED LAN]

Important

• Consultwithyournetworkadministratoraboutthesesettings.

• WhenusingawiredLANconnection,connectaLANcable(Ethernetcable)totheLANport(RJ-45)oftheprojec-

tor.(→page112)

TIP:Thenetworksettingsyoumakewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

[WIREDLAN] [DISABLE] WiredLANconnectionwillbeturnedoff.

[ENABLE] WiredLANconnectionwillbeturnedon.

[SETTINGS] [DHCP]

�� IP address, subnet mask, and gateway will

be automatically assigned to the projector

from your DHCP server�

OFF ��Specify IP address, subnet mask, and gate-

way assigned by your network administra-

tor�

[IPADDRESS] Set your IP address of the network connected to the

projector.

[SUBNETMASK] Setyoursubnetmasknumberofthenetworkconnected

totheprojector.

[GATEWAY] Setthedefaultgatewayofthenetworkconnectedtothe

projector.

[AUTODNS]

ON �� DHCP server will automatically assign IP

address of DNS server connected to the

projector�

OFF ��Set your IP address of DNS server connected

to the projector�

NEC NP-UM330X User Manual

Other manuals for NEC NP-UM330X