To Next Page

To Previous Page

2. Projecting an Image (Basic Operation)

 Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

Optimizingacomputerimageautomatically.(COMPUTER)

PresstheAUTOADJ.buttontooptimizeacomputerimageautomatically.

Thisadjustmentmaybenecessarywhenyouconnectyourcomputerforthersttime.

[Poor picture]

[Normal picture]

NOTE:

Somesignalsmaytaketimetodisplayormaynotbedisplayedcorrectly.

• IftheAutoAdjustoperationcannotoptimizethecomputersignal,trytoadjust[HORIZONTAL],[VERTICAL],[CLOCK],and[PHASE]

manually.(→page82,83)

 Turning Up or Down Volume

Soundlevelfromthespeakeroraudiooutputcanbeadjusted.

TIP:Whennomenusappear,theandbuttonsontheprojectorcabinetwork

asavolumecontrol.

NOTE:

• Volumecontrolisnotavailablewiththeorbuttonwhenanimageisenlarged

byusingtheD-ZOOM(+)buttonorwhenthemenuisdisplayed.

• Volume control is not available with the  or  button whenVIEWER is

used.

TIP:The[BEEP]soundvolumecannotbeadjusted.Toturnoffthe[BEEP]sound,

fromthemenu,select[SETUP]→[OPTIONS(1)]→[BEEP]→[OFF].

Increasevolume

Decrease volume

NEC NP-UM330X User Manual

Other manuals for NEC NP-UM330X