NEC PA903X - Page 101

87
5. Using On-Screen Menu
Cutting a signal from the Entry List [ (CUT)]
1. Press the ▲ or ▼buttontoselectasignalyouwishtodelete.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[ (CUT)]andpresstheENTERbutton.
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bot-
tom of the Entry List.
NOTE:
• Thecurrentlyprojectedsignalcannotbedeleted.
• Whenthelockedsignalisselected,itwillbedisplayedingraywhichindicatesitisnotavailable.
TIP:
• DataontheclipboardcanbepassedontotheEntryList.
• DataontheclipboardwillnotbelostaftertheEntryListisclosed.
Copying and pasting a signal from the Entry List [ (COPY)]/[ (PASTE)]
1. Press the ▲ or ▼buttontoselectasignalyouwishtocopy.
2. Press the ◀, ▶, ▲, or ▼buttontoselect[ (COPY)]andpresstheENTERbutton.
The copied signal will be displayed on the clipboard at the bottom of the Entry List.
3. Press the ◀ or ▶ button to move to the list.
4. Press the ▲ or ▼buttontoselectasignal.
5. Press the ◀, ▶, ▲, or ▼buttontoselect[ (PASTE)]andpresstheENTERbutton.
Data on the clipboard will be pasted to the signal.
Deleting all the signals from the Entry List [ (ALLDELTE)]
1. Press the ◀, ▶, ▲, or ▼buttontoselect[ (ALLDELETE)]andpresstheENTERbutton.
The confirmation message will be displayed.
2. Press the ◀ or ▶buttontoselect[YES]andpresstheENTERbutton.
NOTE: The locked signal cannot be deleted.