NEC PA903X - [Menu(2)]; Menu Position

113
5. Using On-Screen Menu
[MENU(2)]
[MENU ANGLE]
Selectthedirectionfordisplayingthemenu.
[MENU POSITION]
Shiftthemenudisplayingposition.
HORISONTAL POSITION �����Shift the menu in the horizontal directions�
VERTICAL POSITION ����������Shift the menu in the vertical directions�
RESET ���������������������������������Reset the menu displaying position to the default factory setting (the screen center)�
TIP
• Oncetheprojectorispoweredoff,themenudisplayingpositionwillresettothedefaultfactorysetting.
• Inputterminalandmessagedisplayingpositionarenotinuencedbythe[MENUPOSITION].
• ItenablestomovethemenubymouseclickwhenacommerciallyavailableUSBmouseisconnected.
• Itenablestomovethemenupositionbythe▼▲◀ and ▶buttonsholdingtopresstheCTLbuttonontheremotecontrolor
mouse click.
• WhiletheMENUPOSITIONoftheon-screenmenuisdisplayedonandthemenuismovedbythe▼▲◀ and ▶ buttons holding
topresstheCTLbuttonontheremotecontrol,theindicationofadjustedvalueonthemenuwillnotbechanged.Inthiscase,
closetheMENUPOSITIONmenuonceanddisplayitagainforindicatingtheadjustedvalueproperly.