NEC PA903X - ❷ Making Connections; Analog Rgb Signal Connection

143
6. Installation and Connections
❷ Making Connections
Acomputercable,HDMIcable,oraDisplayPortcablecanbeusedtoconnecttoacomputer.
Theconnectioncableisnotenclosedwiththeprojector.Pleasegetreadyasuitablecablefortheconnection.
Analog RGB signal connection
• Connectthecomputercabletothemonitoroutterminal(miniD-sub15pin)onthecomputerandthecomputer
video input terminal on the projector. Please use a computer cable attached with a ferrite core.
• Selectthesourcenameforitsappropriateinputconnectorafterturningontheprojector.
Inputconnector
INPUTbuttonontheprojector
cabinet
Buttonontheremotecontrol
COMPUTERIN
7:COMPUTER
7/COMPUTER
COMPUTER IN
AUDIO IN
AUDIO OUT
Stereo mini-plug audio cable (not supplied)
NOTE:
• Pleasechecktheoperatingmanualofthecomputeras
the name, position and direction of the terminal may
differ depending on the computer.
Computer cable (sold commercially)