NEC PA903X - Signal Type

97
5. Using On-Screen Menu
[SIGNAL TYPE]
SelectionofRGBandcomponentsignals.Normally,thisissetto[AUTO].Pleasechangethesettingifthecolorof
theimageremainsunnatural.
AUTO ��������������������� Automatically distinguishes RGB and component signals�
RGB ����������������������� Switches to the RGB input�
REC601 ������������������ Switches to the component signal conforming to the ITU-R Rec601 standard�
Setting appropriate to SDTV images�
REC709 ������������������ Switches to the component signal conforming to the ITU-R Rec709 standard�
Setting appropriate to Hi-Vision images�
REC2020 ���������������� Switches to the component signal conforming to the ITU-R Rec2020 standard�
Setting appropriate to 4K images�
[VIDEOLEVEL]
SelectionofthevideosignallevelwhenconnectinganexternaldevicetotheHDMI1INterminal,HDMI2INterminal,
DisplayPortinputterminal,andHDBaseTinputterminaloftheprojector.
AUTO ��������������������� The video level is switched automatically based on the information from the device outputting the signal�
Depending on the connected device, this setting may not be made properly� In this case, switch to [NORMAL”
or “ENHANCED” from the menu and view with the optimum setting�
NORMAL ���������������� This disables the enhanced mode�
ENHANCED ������������ This improves the image’s contrast, expressing the dark and light sections more dynamically�
SUPER WHITE ������� The video contrast is improved and the dark areas appear more dynamic�
[HDR MODE]
AUTO ��������������������� Automatically distinguishes HDR signal�
OFF ������������������������ Projects the image based on the input signal
ON
������������������������� Projects the image conforming to the HDR signal
Note:Theseoptionsareavailableexclusivelyfor4Ksignal.