NEC PA903X - Page 121

107
5. Using On-Screen Menu
PC TOOL
Recallthegeometriccorrectiondatathatisregisteredintheprojectorbeforehand.
Threetypesofcorrectiondatacanberegistered.
NOTE:
• Aselectricalcorrectioniscarriedoutingeometriccorrection,thebrightnessmaybeaffectedandthepicturequalitymaybe
degraded.
RESET
ResettheadjustmentvaluethathasbeensetupasMODEinGEOMETRICCORRECTION(returntotheinitialvalue).
• ThisisineffectivewhenMODEissetOFF.
• ResetcanbeexecutedbypressingandholdingtheGeometericbuttonontheremotecontrolforover2seconds.