To Next Page

To Previous Page

131

5. Using On-Screen Menu

[HDBaseT OUT SELECT]

SelectsignaltooutputfromtheHDBaseTOUT/Ethernetportontheprojector.Whentwoimagesareprojectedsimul-

taneously(PIP/PICTUREBYPICTURE),theimageforthemainscreenisoutput.

AUTO �� Output the input signal� When [PIP] has been set, the input signal for the main screen is output�

HDMI1 �� Output the input signal thru the HDMI1 input terminal�

HDMI2 �� Output the input signal thru the HDMI2 input terminal�

DisplayPort �� Output the input signal thru the DisplayPort IN terminal�

HDBaseT �� Output the input signal thru the HDBaseT IN/Ethernet port�

NOTE:

• SignalthrutheCOMPUTERinputterminalcannotbeoutput.Inthestate[PIP]or[PICTUREBYPICTURE]hasbeensetand

[AUTO]hasbeensetforthisfunction,moreover,theinputterminalforthemainscreenistheCOMPUTERandtheinputterminal

forthesubscreenisoneamongtheHDMI1IN,HDMI2IN,DisplayPortINterminals,orHDBaseTIN/Ethernetport,thesignalfrom

the sub screen will be output.

• Ifthesetinputterminalsformainandsubscreenfor[PIP]and[PICTUREBYPICTURE]aredifferedfromtheselectedinput

terminals, any image will be output.

• 4K60pand4K50psignalscannotbeoutput.

[EDIDVERSION]

SwitchtheEDIDversionfortheHDMI1INandHDMI2INterminals.

MODE1 �� Supports general signal

MODE2

�� Supports 4K signal

Select this mode for displaying 4K image using the device supporting 4K

NOTE:

Ifimageandsoundcannotbeoutputin[MODE2],switchto[MODE1].

[HDCPVERSION]

SwitchtheHDCPversionfortheHDMI1INandHDMI2INterminals.SelectHDCP2.2forgeneralsignal.

HDCP2�2 �� Automatically switch the mode HDCP2�2 and HDCP1�4

HDCP1�4 �� Forcedly perform transmission with HDCP1�4

NOTE:

• IfimageandsoundcannotbeoutputfromthemonitorconnectedwiththeHDBaseTOUT/Ethernetport,switchtheHDCPversion

toHDCP1.4.

Other manuals for NEC PA903X

Installation Guide14 pages

Questions and Answers:

Need help?

Do you have a question about the NEC PA903X and is the answer not in the manual?

NEC PA903X Specifications

General

Matrix size	0.76 \
Native aspect ratio	4:3
Projection distance	0.74 - 20.9 m
Projection technology	LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	40 - 500 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-30 - 30 °
Vertical synchronization (max)	0.12 kHz
Vertical synchronization (min)	0.024 kHz
Keystone correction, horizontal	-40 - 40 °
Horizontal synchronization (max)	153 kHz
Horizontal synchronization (min)	15 kHz
Lamp power	420 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	5000 h
Focus	Auto/Manual
Zoom capability	Yes
Focal length range	- mm
Vertical lens shift range	-0.1 - 0.6 °
Horizontal lens shift range	-0.3 - 0.3 °
Number of optional lenses supported	8
3D	No
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 4096 x 2160
Noise level	39 dB
Certification	UL60950-1, FCC 15 B (ANSI C63.4.2014), C22.2 No.60950-1-07, ICES-003 6 (ANSI C63.4:2014)
Noise level (economic mode)	33 dB
Ethernet LAN (RJ-45) ports	1
Audio (L/R) in	0
HDMI connector type	Full-size
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Placement	Desktop
Product type	Large venue projector
Product color	White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.7 W
Power consumption (typical)	566 W
Power consumption (PowerSave)	0.3 W
Power consumption (economy mode)	390 W
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
RMS rated power	10 W
Harmonized System (HS) code	85286200