NEC UNIVERGE NEAX 2000 IPS - Page 131

CHAPTER 5 FEATURE DESCRIPTION
UNIVERGE NEAX 2000 IPS General Description Page 127
Issue 5
Preset Dialing
This feature allows a Multiline Terminal user to prepare and verify a number in the display
on the LCD before dialing. When a wrong number is entered, the user can correct the
number before originating the call.
Prime Line Pickup
This feature allows a Multiline Terminal user to go off hook and originate a call from the
line assigned as the Prime Line without depressing the associated line key.
Recall Key
Each Multiline Terminal is equipped with a Recall Key that is used to generate a hookflash
to access features provided by the outside exchange, or to abandon a call while retaining the
line for origination of another call.
Relay Control Function Key
This feature provides a Multiline Terminal with the ability to activate/deactivate relays (on a
PN-DK00) to control external devices.
Ring Frequency Control
The ring frequency of the Multiline Terminal can be controlled on a station basis in system
programming (14 frequencies are available) or by use of a function key on the Multiline
Terminal.
Ringing Line Pickup
This feature provides the ability to answer any call ringing into a Multiline Terminal by just
lifting the handset.
Soft Keys
According to the status of the Multiline Terminal, function keys (Soft Keys) are displayed in
the third line on the LCD. If the status of Multiline Terminal changes, the Soft Keys will
change automatically. Also if the Help key is pressed, explanation of indicated Soft Keys are
shown on the LCD.
Volume Control
Multiline Terminals are equipped with common Volume Control keys for:
• Built-in Speaker / Handset Receiver Volume.
• Ring Volume.
• C.O. Transmission Level.
• LCD contrast.
• Ring Tone Frequency
The Volume Control keys are located on the lower front side of Multiline Terminals (UP
and DOWN).
Remote Hold
This feature allows a Multiline Terminal user to hold it on the line button of transferred terminal,
by pressing the Hold key.