CHAPTER 5 FEATURE DESCRIPTION
UNIVERGE NEAX 2000 IPS General Description Page 128
Issue 5
Remote PIM over IP
When IPS
DMR
and 2000 IPS PIM are installed at remote site, and connected to a 2000 IPS or
IPS
DM
at main site over IP network, the Main Site system controls and maintains the IP Remote
PIM operation as one single system. If a communication failure occurs between the Main Site
and Remote Site, the Remote Site automatically changes over to a survival mode and operates as
a stand-alone system.
Reserve Power
This feature provides backup power from a 24V battery source in the event of a commercial
power failure.
Resident System Program
This feature provides the installers a simple procedure to have the system generate system data
according to the system hardware configuration, thereby providing immediate operation and
shorter programming time. When activated, the system scans hardware configuration (such as
line/trunk card slot location) and assigns system data (such as extension numbers, trunk
numbers, etc.) according to a predetermined generic program assignment.
Return Message Schedule Display
This feature permits any station user to register his Return Schedule from his phone when he
leaves his desk or the premises, and have the Return Schedule displayed on a calling Multiline
Terminal with a Liquid Crystal Display (LCD) during his absence.
Room Cutoff
This feature allows the following types of terminals to temporarily restrict guest room telephones
from making unauthorized calls when guests are away from their rooms. This feature allows the
same restriction when the rooms are in Check Out status:
•
Attendant Console
• Hotel/Motel (H/M) Front Desk Instrument
• Property Management System (PMS) terminal
• Guest room telephones using a special access code
There are two types of Room Cutoff conditions depending on the type of calls restricted.
• External Call Restriction: All outgoing calls from guest room stations are restricted in the
Room Cutoff status. (Only internal calls are available.)
• Toll Call Restriction: All toll calls from guest room stations are restricted during Room
Cutoff status. (Internal and local calls are available.)
Room Status
This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual display of the
guest's room status. A supplementary print out (individual and summary) can be provided.
Route Advance
This feature automatically routes outgoing calls over alternate facilities when the first choice
trunk group is busy. Users select the first choice route by dialing the corresponding access code,
and the equipment then advances through alternate trunk groups only if the first choice is busy.
Save and Repeat
This feature allows a Multiline Terminal to save a specific dialed number and then redial that
number at a later time.
To Next Page
Loading...
