NEC UNIVERGE NEAX 2000 IPS - Page 64

CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 60
Issue 5
DtermIP Terminal Specifications
Network Parameters
Internet Layer All Models: IPv4
IP Protocol All Models: NEC Peer-to-Peer (only)
Jitter Buffer All Models: Max 300msec (10msec steps)
Payload Interval All Models: 10ms ~ 40ms (10ms steps)
IP Addressing All Models: DHCP or Static Assignable
QoS All Models: 801.p, ToS and Diff-Service
Power Support Options
External All Models: AC: 24V, Current: 750mA
Operating Temperature All Models: 0 - 40 deg C (32 - 103 deg F)
Spare Pair Power All Models: Yes
In-Line Power All Models: Yes
External Power via
AC adapter
All Models: Yes (Optional adapter)
Quality of Service
All Models: Yes
Layer 2: 802.1p/Q; Layer 3: IP Precedence, Diff-Services
Equipment Specification Size
(W x D x H)
Tilt up: 7.57" x 8.69" x 5.57"
Tilt down: 7.57" x 8.69" x 3.80" (without stand unit)
DtermIP 4D
Weight: 1.98lbs
Tilt up: 9.09" x 8.54" x 5.28"
Tilt down: 9.09" x 8.54" x 4.17"
DtermIP 8D
Weight: 2.51lbs
Tilt up: 9.09" x 8.54" x 5.28"
Tilt down: 9.09" x 8.54" x 4.17"
DtermIP 16D
Weight: 2.51lbs
Tilt up: 9.09" x 9.88" x 5.28"
Tilt down: 9.09" x 9.88" x 4.17"
DtermIP 16LD
Weight: 2.91lbs
Tilt up: 9.09" x 9.57" x 5.28"
Tilt down: 9.09" x 9.57" x 4.17"
DtermIP 32D
Weight: 2.84lbs