NEC UNIVERGE NEAX 2000 IPS - Page 65

CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 61
Issue 5
DtermIP Terminal Specifications
DtermIP 4D

Voltage: 48V
 Current: 90ma
 Power Consumption: 4.32W
 Audio Algorithm: G.711, G.729A
 Protocol Support: 802.3af (CDP and NDP with ILPA integration)

10/100 base T (IEEE 802.3), RJ 45
DtermIP 8D
 Voltage: 48V
 Current: 92ma

Power Consumption: 6.4W

Audio Algorithm: G.711, G.729A, G.723.1
 Protocol Support: 802.3af and CDP (NDP with ILPA integration)
 10/100 base T (IEEE 802.3), RJ 45 multi-port Switch
DtermIP 16D

Voltage: 48V
 Current: 92ma
 Power Consumption: 6.4W
 Audio Algorithm: G.711, G.729A, G.723.1
 Protocol Support: 802.3af and CDP (NDP with ILPA integration)

10/100 base T (IEEE 802.3), RJ 45 multi-port Switch
DtermIP 32D
 Voltage: 48V
 Current: 92ma

Power Consumption: 6.4W

Audio Algorithm: G.711, G.729A, G.723.1
 Protocol Support: 802.3af and CDP (NDP with ILPA integration)
 10/100 base T (IEEE 802.3), RJ 45 multi-port Switch
DtermIP 16LD

Voltage: 48V
 Current: 92ma
 Power Consumption: 6.4W
 Audio Algorithm: G.711, G.729A, G.723.1

Protocol Support: 802.3af and CDP (NDP with ILPA integration)

10/100 base T (IEEE 802.3), RJ 45 multi-port Switch