NEC UNIVERGE NEAX 2000 IPS - Page 70

CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 66
Issue 5
Specification for Series i Digital Terminals
Item Description
Curl Cord Length 12ft
Weight (no handset) 510g (min.)
LCD Display
24 digit x 3 line (alphanumeric and some
characters) no back light
Ringing Sound Level
Max. 80dBSPL (in output limit condition)
Max. 86dBSPL (in normal condition)
Built in Hands Free Half duplex
Items Provided with Instrument Line cord, Directory card
Handset Cradle K type compatible
LCD angle
14~42.5 deg. (on the desk, no housing tilt)
25~53.5 deg. (on the desk, housing tilt up)
-4.4 deg. (wall mounting)
Housing Face Angle
14~25 deg. (on the desk)
-4.4 deg. (wall mounting)
Recommended Headset NEC Headsets
Other HAC
Dterm Series i Digital Terminal Options
Item Description
WM-R Unit
Series i Multi-line Terminals with an AP(R)-R, AP (A)-R, CT (A)-R,
and/or an IP-R Unit can be wall mounted using the WM-R Unit.
AD(A)-R Unit
Provides Series i Multi-line Terminals ability to interface with
recording device.
AP( R)-R Unit
Provides Series i Multi-line Terminals ability to interface with analog
device such as a cordless telephone, facsimile machine, external
speakerphone, Automatic Dialer or modem. Provides ringing to
analog device connected. Requires an AC-R ADP.
AP(A)-R Unit
Provides Series i Multi-line Terminals ability to interface with analog
device such as a cordless telephone, facsimile machine, external
speakerphone, Automatic Dialer or modem. No ringing is provided.
CT(A)-R Unit
Connects a Series i Multi-line Terminal to a PC providing a complete
turnkey package with graphical telephone user interface and call
logging. Shipped with Multi-line Phone Kits software. Supports
Serial interface.
IP-R Unit
A compact plug-and-play device that installs into the base of a Dterm
Series i display terminal. Integrated two-port 10/100baseT Ethernet
pass through hub that permits using one port to connect the network
interface card (NIC) from the PC to the IP network. The other is
plugged directly into a LAN or an IP network device such as a router,
DSL modem or cable modem. Requires an AC-R ADP.
AC-R Unit AC adapter for DSS/BLF Console, AP(A), AP(R), or IP-R Unit