CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 67
Issue 5
Dterm Series i Line Conditions
Cable Length Note 1 Standard
with AC Adapter
Note 4
8DLC 300m (984ft)
Note 2
4DLC 300m (984ft) 1200m (3937ft)
Dterm 8 / 8D
2DLC 850m (2789ft) 1200m (3937ft)
8DLC 200m (656ft)
Note 2
4DLC 200m (656ft) 1200m (3937ft)
Dterm 16/16D
2DLC 850m (2789ft) 1200m (3937ft)
8DLC 200m (656ft)
Note 2
4DLC 200m (656ft) 1200m (3937ft)
Dterm 32/32D
2DLC 850m (2789ft) 1200m (3937ft)
8DLC - 300m (984ft)
4DLC - 1200m (3937ft)
Dterm Series i
DSS/BLF Console
Note 3
2DLC - 1200m (3937ft)
Note 1: Cable length is based on the following conditions.
• Diameter of the cable is 0.5 mm.
• The Protection arrester is not inserted between the terminal and PBX.
Note 2:
When using 8DLC card, it is not available for long line function, even if it is equipped
with AC Adapter.
Note 3:
The DSS/BLF Console requires local AC/DC supply.
Note 4:
DTR-2DT and DTR-4D terminals do not support long line adapters.
To Next Page
Loading...
