CHAPTER 3 TERMINALS
UNIVERGE NEAX 2000 IPS General Description Page 72
Issue 5
Dterm Series E Digital Terminal Options
Item Description
ADA-U UNIT
Ancillary Device Adapter;
Used for External Recording Devices
APR-U UNIT
Analog Port Adapter with Ringing, used to connect external
analog devices such as PC Modem, analog Cordless etc.
Requires ACA-U Unit for local power.
APA-U UNIT
Analog Port Adapter without Ringing, Used for external
speakerphones.
Requires ACA-U Unit for local power when the connected
device is over
50 ft. from the APA-U Unit.
HFU-U UNIT Full duplex Speakerphone with external microphone.
CTA-U CTI Adapter Unit
ACA-U UNIT
AC Adapter provides local power for APR-U Unit, APA-U
Unit, CTA-U Unit, HFU-U Unit, IPW-U Unit, DESKCON, and
Dterm long line.
WMU-U UNIT
Wall Mount Unit, Required when using terminal adapters
attached to phone. If not using terminal adapters built-in
wall mount in phone is used.
IPW-2U (ELC)
The IPW-2U (ELC) adapter is a full duplex switch, which
can be installed on any of the Dterm Series E display
phones. With this adapter, you can upgrade the 8, 16, 32-
button Dterm Series E terminals to VoIP when using the
PN-32IPLA (ELC) IP station card.
IPW-2U (P-P)
The IPW-2U (P-P) adapter is a full duplex switch, which can
be installed on any of the Dterm Series E display phones.
With this adapter, you can upgrade the 8, 16, 32-button
Dterm Series E terminals to VoIP when using Peer to Peer
connection.
To Next Page
Loading...
