Issue 4.0 UNIVERGE SV8100
3 - 42
Hotline always follows the Handsfree Answerback/Forced Intercom
Ringing mode set at the called extension. The Hotline caller can
override the setting, if desired.
If the partner's extension is busy, Hotline does not automatically activate
Off Hook Signaling.
Default Setting
No Hotline keys programmed (no keys assigned code 01 in Program
15-07-01).
Programming
15-07-01 Programmable Function Keys
Assign a function key for Hotline (code 01 + partner's extension number).
20-13-06 Class of Service Options (Supplementary Service) – Automatic Off-Hook
Signaling (Automatic Override)
Program 20-13-06 sets the conditions under which a Hotline key for a
non-ACD Agent indicates that the covered extension is busy. This also
applies to Reverse Voice Over and DSS Console keys for all co-workers.
With condition 1 in the following chart, the BLF LED is on only when both
extension line appearances are busy. In conditions 2~4, the BLF LED is on
when one line appearance is busy.
30-05-02
through
30-05-21 DSS Console Lamp Table
Customize the flash rates for the system DSS console.
Related Features
Direct Station Selection (DSS) Console
Do Not Disturb
Handsfree Answerback/Forced Intercom Ringing
Off-Hook Signaling
Programmable Function Keys
To Next Page
Loading...
