NEC Univerge SV8100 - Page 82

Issue 4.0 UNIVERGE SV8100
3 - 50
2. Dial the AIC Log Out service code (Program 11-13-09).
- OR -
1. To log out of an ACD group without using AIC: Lift the handset.
2. Dial the ACD Log Out service code 655 (Program 11-13-02).
Multiple Agent Log In:
To log in:
Multiline
1. Once logged in with first AIC, press the ACD Log In/Log Out key (Program
15-07-01 or SC 751: *10).
2. Dial 0 to cancel the log out option.
3. Dial the Agent Identity Code (AIC) (up to four digits).
 The ACD Log In/Log Out key lights.
- OR -
1. Press the Speaker key and dial the AIC Log In service code (Program
11-13-08).
2. Dial the Agent Identity Code (AIC) (up to four digits).
 The ACD Log In/Log Out key lights.
Single Line Telephone
Follow Steps 1~3 to log in with additional AICs (up to three) at any time.
1. Lift the handset and dial the AIC Log In service code (Program 11-13-08).
2. Dial the log in code (up to 20 digits).
 This step is not required if the ID code is disabled in Program 41-01-02.
3. Dial the first Agent Identity Code (AIC) (up to four digits).
 You will hear a confirmation tone.
Complete Steps 4 and 5 when immediately logging in with additional AICs.
4. For second agent log: Dial the second Agent Identity Code (AIC) (up to four
digits).
 You will hear a confirmation tone.
5. For third agent log: Dial the third Agent Identity Code (AIC) (up to four digits).
 You will hear a confirmation tone.