NEC Univerge SV8100 - Page 85

UNIVERGE SV8100 Issue 4.0
ACD Installation Manual 3 - 53
Operation
To answer a call ringing an ACD Group key:
1. Press flashing SIE key (Program 15-07-01 or SC 752: *03 + ACD master).
 The SIE key may flash only, ring after a delay or ring immediately.
To Transfer a call to an ACD Group:
1. Place or answer call.
2. Press ACD Group SIE key.
3. Hang up to have call go through.
 You cannot place a screened Transfer to an ACD Group.
To set up an ACD Group SIE key:
1. Press the Speaker key.
2. Dial 752.
3. Press the programmable key you want to program.
 The previously programmed entry displays.
4. Dial 03.
5. Dial the ACD Group master number and press Hold.
 You see the SET RING option.
6. Dial 1, 2, 3, 4, 5, 6, 7 and 8 to immediate ring for the Day, Night, Midnight, Rest,
Day2, Night2, Midnight2, and Rest2 modes respectively.
- OR -
Press Hold and dial 1, 2, 3, 4, 5, 6, 7 and 8 to delay ring for the Day, Night,
Midnight, Rest, Day2, Night2, Midnight2, and Rest2 modes respectively.
 You can make flexible entries. For example, you can have immediate ringing in the day
and night modes and delay ringing for the midnight and rest modes.
 The ringing mode (delayed or immediate) follows system programming.
7. Press the Speaker key to hang up.