NEC Univerge SV8100 - Do Not Disturb (DND); Figure 4-14 Do Not Disturb Screen

4 - 14 Toolbar Functions
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 SV8100
 Pressing the Start button will initiate the Call Forward operation.
 Pressing the Cancel function will close the Call Forward dialog without
changing the settings.
1.20 Do Not Disturb (DND)
The Do Not Disturb function allows the user to set their phone to block
incoming calls. When the Do Not Disturb function is selected, the following
dialog will be displayed (refer to Figure 4-14 Do Not Disturb Screen).
 The Do Not Disturb dialog allows the user to either set DND or clear a
previous DND setting.
 When “Set Do Not Disturb” is selected, the user can specify the DND
condition using the “Applies to:” field.
 The available DND options presented in the “Applies to” field are:
 All Calls
 Outside Calls
 Paging/Intercom/Fwds/Transfers
 Call Forwards

The “Cancel Do Not Disturb” is selected to remove a previous DND setting
 Selecting the Start button will initiate the requested DND operation.
 Selecting the Cancel button will close the Do Not Disturb dialog without
processing the DND request.
Figure 4-14 Do Not Disturb Screen