NEC Univerge SV8100 - Emulation Phone DSS Module; Figure 3-11 Emulation Phone DSS Module

SV8100 Issue 1.0
Desktop Applications 3 - 29
___________________________________________________________________________________
___________________________________________________________________________________
4.3 Emulation Phone DSS Module
The Phone Image tab on the Preferences menu allows the user to specify an
attendant module be included in the phone image. When this option is
selected, a 60-button DSS module will be displayed, as shown in Figure 3-11
Emulation Phone DSS Module.
 Each button on the DSS module includes two LEDs.
 The right LED is green and when lit indicates that a message is pending
on the destination extension.
 The left LED is red and simulates a solid lit LED, as well as supporting all
of the different flash rates that are available on the physical DSS module.
 The state of the red LED tracks the same conditions that affect the LED
on the physical DSS module.
Figure 3-11 Emulation Phone DSS Module