NEC Univerge SV8100 - Compact Phone Mode; Closed Phone Mode; Figure 3-3 Closed Phone Image Screen

3 - 16 Desktop Application Startup
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 SV8100
SECTION 3 COMPACT PHONE MODE
The Compact Phone is a user interface mode within the desktop application that can
be initiated from any of the licensing levels (SP310, PC Assistant, and PC Attendant).
The Compact Phone mode is a valid UI mode when the desktop application is
connected to the telephone system using Deskset, IP Soft Phone or SIP only mode.
When the Compact Phone mode is selected, the Toolbar, Window, and Emulation
images are not shown. Upon entry into Compact Phone Mode, the Compact Phone
image initially displays “Closed”, as described in the following section.
3.1 Closed Phone Mode
The Closed Phone image is the default state when this control is enabled. The
following image provides an example of the closed phone.
Figure 3-3 Closed Phone Image Screen