NEC Univerge SV8100 - Configuration Wizard, Screen 1; Configuration Wizard, Screen 2

SV8100 Issue 1.0
Desktop Applications 2 - 31
___________________________________________________________________________________
___________________________________________________________________________________
3.2 Configuration Wizard, Screen 1
The first screen displayed for the configuration wizard contains the following
settings.
 The Network Name/IP Address field is used to identify the network
location of the SV8100 Telephone System. Either the Network Name or
full IP address of the IPLA interface can be entered in this field.
 The CTI Port Number field is used to identify the port number assigned to
Device 9 in Program 10-20-01.
 The SIP Port number field is used to identify the port number assigned in
the SV8100 Telephone System for SIP devices.
 The O&M Port field is used to specify the port number that is assigned to
Device 11 in Program 10-20-01 for the O&M Interface.
Figure 2-26 Configuration Wizard, Screen 1