NEC Univerge SV8100 - Phone Messaging; Sending and Receiving Phone Messages; Figure 6-7 Phone Message Menu

SV8100 Issue 1.0
Desktop Applications 6 - 9
___________________________________________________________________________________
___________________________________________________________________________________
SECTION 7 PHONE MESSAGING
Attendant level users who have enabled the Shared Services have the ability to send
Phone Messages to other users. Phone Messages can be sent from the attendant to
any extension on the phone system. The Phone Message is shown as a short text
message on the phone display, allowing the user to respond using the softkeys.
The Phone Message component has the same functionality as in the IPK II PC
Attendant. The attendant can initiate this function from the toolbar, directory, or BLF
panel, in exactly the same manner as the IPK II PC Attendant. Phone Messages and
responses are tracked in the Active Call panel in the Full Window mode.
7.1 Sending and Receiving Phone Messages
Select the Phone Message function to display the following menu (refer to
Figure 6-7 Phone Message Menu).
 Select the Destination for the message in the To field. The available
destinations include all of the active phone devices on the system.
 The user selects the text to be sent by selecting one of the predefined
messages in the Message list or entering text manually in this field.
 The four Responses fields indicate the predefined responses that are
displayed to the recipient above the softkeys.
 Click the Send button to deliver the message to the specified destination.
 When a Phone Message is received by a user, the message is displayed
on the phone display and the phone beeps.
Figure 6-7 Phone Message Menu