NEC Univerge SV9500 - Page 101

93
• TO BACKUP PERSONAL SETTINGS
You can backup personal settings of DT830G to FTP/
TFTP server. To back up the setting data, the DT830G
needs to be connected to the network that has FTP
(TFTP server).
Before starting the backup, the IP Address of the FTP/
TFTP Server must be entered from DT830G.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Confirm the designated directory (for Win-
dows IIS, the default is “C:\InetPub\ftproot”)
for the backed up file.
<TFTP server>
Specify a desired destination directory for the
backed up file.
STEP 2: Display the Menu screen, and select Setting.
STEP 3: Select Data Backup/Restore.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 4: Select Protocol.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
Note
For details on the XML service, contact the System
Administrator.
3
3
Menu
OK
1
2
[Setting]
3
User Setting
1/1

Download
Data Backup/Restore
4
4

Back
OK
1
2
3
1/1

4
Data Backup
Data Restore
Server Address
FTP Settings
Protocol
5
[Backup/Restore]