121
SPEED CALLING - STATION/GROUP
• TO SET
STEP 1: Press . Receive Dial Tone.
lamp lights red.
STEP 2: Dial the Speed Calling – Station/Group Ac-
cess Code.
STEP 3: Dial the desired abbreviated call code. In this
example, “01” is dialed as the desired abbre-
viated call code.
STEP 4: Dial the destination telephone number.
STEP 5: Press . lamp goes off.
• TO MAKE A CALL
STEP 1: Press (Redial). Receive Dial Tone.
lamp lights red.
STEP 2: Press the desired speed calling number.
STEP 3: Lift the handset. lamp goes off.
Note
When Redial feature is enabled at installation, Last
Number Redial feature and Speed Calling features
using (Redial) key are not available. For details,
contact the system administrator.
TIP
For the assignment of Speed Calling - Station/Group
Access Code, contact the PBX maintenance personnel.
1:25 PM MON 11 MAY 2015
Mic >>>
SPEED
XX
1:25 PM MON 11 MAY 2015
Mic >>>
SPEED
XX01
1:25 PM MON 11 MAY 2015
Mic >>>
0471821111
1:25 PM MON 11 MAY 2015
Mic >>>
SPEED SET
XXXXXX
LNR[ * ]/SPD[_ _] –1
Mic >>>PickUp/G CF-All
To Next Page
Loading...
