NEC Univerge SV9500 - To Originate a Call Using Selective Dialing (Dynamic Dial Pad, Preset Dial)

115
TO ORIGINATE A CALL USING
SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET
DIAL)
Dynamic Dial Pad
STEP 1: Enter desired telephone number (Digit Keys
0-9, *, and #).
STEP 2: LED on lights and hear key touch
tone.
STEP 3: The dialed number appears on the top of
LCD.
Preset Dial
STEP 1: Enter desired telephone number (Digit Keys
0-9, *, and #).
STEP 2: The dialed number appears on the top of
LCD.
STEP 3: Lift handset or press .
or
STEP 3: Press the originating Line Key and lift hand-
set.
Note
Pressing Speaker or going off-hook is not necessary.
Speaker
1:25 PM MON 11 MAY 2015
2000
Mic NoDist >>>
Note
Originating call operation is cancelled by the following
Soft Key operation;
-Press Exit or Cancel.
-Press Clear and cancel by one digit.
2000
Input Dial Number
Clr Cnl
Speaker