113
TO HOLD A CALL
STEP 1: While engaged in a Two-party call:
STEP 2: Press to hold the call in progress.
STEP 3: The person on the other end hears the music
on hold.
STEP 4: Replace the handset.
•TO RETRIEVE
STEP 1: Lift handset or press .
STEP 2: Lift the handset.
• IF UNANSWERED
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Call Indicator lamp flashes and the user
hears Automatic Recall Ringer.
TIP
Any station with this line appearance can retrieve the
call.
Note
Line key will be disabled while the information of XML
application is displayed on to the LCD. DT830G placing
other line on hold by pressing can bring back
the call pressing again, in Hold Fixation
Mode.
Note
Conditions for Hold Fixation Mode;
- Exclusive Hold cannot use at the same time.
- When collaborating with Softphone, this service is not
available.
1:25 PM MON 11 MAY 2015
HOLD
XXXX
Held Station Number
Mic >>>
To Next Page
Loading...
