36
SETUP WITH FEATURE KEY
• MICROPHONE ON/OFF
STEP 1: LED on shows the status of the built-
in microphone.
STEP 2: Press soft key associated with the Mic Dis-
play or press and .
• CALL INDICATOR LAMP ON/OFF
You can select to turn the call indicator lamp either on
or off during ringing.
STEP 1: Press and . The LCD displays:
• SELECT DIAL MODE
You can select one pattern from Normal, Dynamic Dial
Pad or Preset Dial to originate a call.
When only Dynamic Dial Pad is activated:
To Set/Reset Dynamic Dial Pad
STEP 1: Press and . The LCD displays:
Note
The call indicator lamp lights when used as Message
Waiting Lamp, even when it is turned off by the above
operation
7:26 AM MON 11 MAY 2015
Mic >>>NoDist
INDICATOR ON
7:26 AM MON 11 MAY 2015
Mic >>>NoDist
INDICATOR OFF
TIP
When this feature is ON, you may initiate a call by
immediately dialing the number and the station will go
hands-free off-hook automatically. For details, see TO
ORIGINATE A CALL USING SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET DIAL).
7:26 AM MON 11 MAY 2015
Mic >>>NoDist
Direct Dial Pad ON
7:26 AM MON 11 MAY 2015
Mic >>>NoDist
Direct Dial Pad OFF
To Next Page
Loading...
