NEC Univerge SV9500 - Adjusting Angle of Tilt Leg

31
ADJUSTING ANGLE OF TILT LEG
The angle of the tilt leg can be adjusted in four levels.
• TO RAISE TILT LEG
STEP 1: Turn the telephone set upside down.
STEP 2: Adjust the angle of the tilt leg by pulling the
leg in the direction of the arrow. The leg clicks
when it is in position.
STEP 3: Turn the telephone set upside down again.
• TO LOWER TILT LEG
STEP 1: Turn the telephone set upside down.
STEP 2: While lifting the center of the stopper, push
the tilt leg in the direction of the arrow. The leg
clicks when it is in position.
STEP 3: Turn the telephone set upside down again.
First Level
Second Level
Third Level
Fourth Level
Tilt Leg
Stopper
Tilt Leg