NEC Univerge SV9500 - One-Touch Speed Calling Keys

116
ONE-TOUCH SPEED CALLING KEYS
• TO MAKE A CALL
STEP 1: Press the desired One-Touch Speed Call-
ing key.
STEP 2: lamp lights red. A call is automatically
made to a registered party.
STEP 3: Lift the handset. lamp goes off.
• TO SET
STEP 1: Press . lamp lights red.
STEP 2: Press a desired One-Touch Speed Calling
key.
STEP 3: Enter a desired telephone number or feature
access code (up to 32 digits) on the keypad.
Display indicates the digits dialed.
STEP 4: Press again to save the number.
lamp goes off.
•TO VERIFY
STEP 1: Press . lamp lights red.
STEP 2: Press a desired One-Touch Speed Calling
key.
STEP 3: Display indicates the assigned number.
STEP 4: Press again. lamp goes off.
Speaker
1:25 PM MON 11 MAY 2015
0821111
Mic >>>
Speaker
Feature
Feature
1:25 PM MON 11 MAY 2015
0821111
Mic NoDist >>>
TIP
To program a hook switch for transfer or feature activa-
tion, press as first digit. (! displays on LCD.)
TIP
To program a pause, press as any digit other
than the first digit. (– displays on LCD.)
TIP
To program a Voice Call, press after dialing
station number. (Voice displays on LCD.)
Feature
Feature
1:25 PM MON 11 MAY 2015
SPEED SET
Mic NoDist >>>
Feature
Feature
1:25 PM MON 11 MAY 2015
0821111
Mic NoDist >>>
Feature
Feature
Recall
Recall
Transfer