106
TO LOGIN
STEP 1: When login mode is activated, the telephone
prompts for Login ID and Password.
STEP 2: Enter Login ID and press Set.
(Station number is usually used as the Login code.)
STEP 3: Enter a password and press OK.
STEP 4: If the Login ID and password is accepted, dis-
play changes to normal idle status.
TO LOGOUT
STEP 1: Press the preassigned Logout on the termi-
nal.
STEP 2: “LOGOUT?” is displayed on the LCD of the
terminal.
STEP 3: Press the Logout on the terminal again.
Cancel Back Set OK
Password
Login ID
:
:
Time/Feature Activity
Information Area of LCD
Cancel Back Set OK
Password
Login ID
:
:
2000
Cancel Back Set OK
Password
Login ID
:
:
2000
*****
TIP
The soft key location is an example.
TIP
For the assignment of Logout, contact the PBX mainte-
nance personnel.
1:25 PM MON 11 MAY 2015
Mic NoDist >>>
1:25 PM MON 11 MAY 2015
Mic NoDist >>>
1:25 PM MON 11 MAY 2015
Logout >>>
LOGOUT?
To Next Page
Loading...
