NEC Univerge SV9500 - Page 110

102
STEP 13:Enter the directory where the backup file is
stored.
Enter the directory and press or OK.
STEP 14:The display goes back to the FTP Settings
screen. Press or Back to display the
Backup/Restore screen.
STEP 15:Select Server Address.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
STEP 16:Enter an IP address of the FTP/TFTP server
which stores the backup file.
For example, to set the IP address of
10.41.208.205, enter 10*41*208*205 [separate
with an asterisk (*)].
After entering an IP address, press or OK.
TIP
For details on character entry method, see HOW TO
INPUT CHARACTERS.
OK
Back
BK
A
[Folder]
Input a folder name.

Back
OK
1
2
[FTP Settings]
3
1/1
Password
Folder
User ID
3
3

Back
OK
1
2
3
1/1

4
Data Backup
Data Restore
Server Address
FTP Settings
Protocol
5
[Backup/Restore]
OK
Back
BK
1
‘*‘For‘.‘
.
.
.
000
0
[Server Address]