NEC Univerge SV9500 - Page 160

152
STEP 4: Enter a name and press (Enter) or OK.
Ex. To enter “NEC”:
Press twice to enter “N”.
Press twice to enter “E“.
Press three times to enter “C“.
STEP 5: Enter the telephone number by using digit
keys and press
(Enter) or OK.
STEP 6: “NEC” and its telephone number has been
added into Local Phonebook. Two seconds
later, the display returns to Local Phonebook
screen.
To Search For Name
The procedure shown below is available in Local
Phonebook.
Example:
To Find “NEC BNET”.
STEP 1: While Local Phonebook screen is displayed,
press Srch. (If no data is registered in Local
Phonebook, the message “Local Phonebook
Empty” appears.)
TIP
If “>>>” is pressed on the above screen, the following
soft keys appear. Pressing or Eu-s/Eu-l shifts
characters between uppercase and lowercase.
TIP
To delete an entered character, press or Clr.
TIP
To move the cursor one space to the right, press or
“
” once
Local Phonebook
CnlAddSrch
6
3
2
>>>OK
Clr

Add name:
NEC
<<< -Eu-s
Cnl
(Lower-case character)
<<< -Eu-l
Cnl
(Upper-case character)
TIP
To delete an entered character, press or Clr.
CnlOKClr
Number:
Name: NEC
Entry added!