165
STEP 5: Enter a name to be registered in directory.
Enter a name by using digits keys. After entering the
name, press or OK.
STEP 6: The display goes back to the Edit screen. Se-
lect Group.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 7: Select a desired group.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press the digit key of desired number, and press
or OK.
In this example, Colleagues is selected.
Note
Up to 32 characters can be entered as a group name.
For details on character entry method, see HOW TO
INPUT CHARACTERS.
OK
Back
[Name]
Input a name.
Option
BK
A
M
1
2
3
4
5
6
7
8
OK
Back
1/2
[Edit]
Save
Tel #1
Company Name
Ring Tone
Tel #4
Tel #2
Tel #3
Ken Kobus
Group
Gr
To Next Page
Loading...
