175
STEP 5: Select a target name by pressing .
In the following Directory (Name List) screen,
you can make a call to the selected party by
pressing or Call. If two or more telephone
numbers are assigned to an entry, a top priority
telephone number will be dialed.
STEP 6: To display the detailed data for a specific
name, press Detail while the name is high-
lighted.
In the following Detail screen, you can make a call
to the selected number by pressing or Call.
Note
A distinction is made between upper case and lower
case characters, according as the system settings. For
example, "Ken Kobus" and "ken kobus" are distin-
guished as different character strings. For details, con-
tact the System Administrator.
Note
A blank space is also distinguished while searching
database for a name.
Note
Up to 32 characters can be entered as a company
name. For details on character entry method, see HOW
TO INPUT CHARACTERS.
TIP
Even if the name is not entered to the end, you can
search for a name.
TIP
If there is no entry corresponding to the entered name,
"No data" is issued on the screen.
OK
Back
[Name]
Input a name.
Option
BK
A
M
Note
If two or more telephone numbers are assigned to an
entry, a top priority telephone number is automatically
selected when the Detail screen appears.
OK
Back
Option
Detail
[Directory]
1/1
M
Abe Sabro
Abe Jiro
Abe Taro
Abe Ichiro
Abe Kentaro
1
2
3
4
5
6
7
8
Back
1/2
Tel #4
Tel #3
Gr
Ken Kobus
Colleagues
Automatic
NEC
31300
0800XXXXXX
[Detail]
Call
To Next Page
Loading...
