NEC Univerge SV9500 - Page 198

190
STEP 5: Select Prefix 1.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 6: Enter a prefix number.
Enter a prefix number by pressing the digit keys.
After entering the prefix, press or OK.
STEP 7: The display goes back the Prefix screen at
STEP 6. If multiple prefixes need to be set, re-
peat STEP 5 and STEP 6. In that case, select
Prefix 2 and Prefix 3.
1
1

Back
OK
1
2
3
1/1
[Prefix]
Prefix 3
Prefix 2
Prefix 1
OK
Back
BK
1
[Prefix 1]
Input a prefix number.
Note
A maximum of 10 digits (0-9, * and #) can be set as a
prefix.
Note
When prefix is added, up to 32 digits including the pre-
fix can be sent as dial number.
2
3