NEC Univerge SV9500 - Page 237

229
STEP 3: Select the incoming call with the recording
icon, and press Option.
• Highlight an item by using or UP/DOWN soft key,
and confirm the incoming call with call recording data.
STEP 4: From the SubMenu, select Play.
The following is the procedure to play.
1. Highlight an item by using or UP/DOWN soft
key, or press .
2. Press , or OK.
STEP 5: Go off-hook or press key to start play-
ing the call recording data.
Note
If you remove the USB memory while the incoming/out-
going calls are displayed, the call recording icon will
disappear from the screen.
1
2
Option
Back

1/1
[Incoming]
M
18/MAY/2015 (MON) 9:55
Abe Kentaro
7207
Ken Kobus
18/MAY/2015 (MON) 11:00
7205
The icon indicates that the call has been recorded.
2
2
1
2
(MON) 11:00
Ken Kobus
Tel: 7205
10:00
Abe Shintaro
Tel: 7207
1
3
4
Prefix
5
6
Delete All
Directory Add
Delete One
SubMenu 1/1
Cancel
OK

Call

2
Play
Note
If the USB memory has no data of the recorded tele-
phone conversation, or the USB memory is not con-
nected to the terminal, an error message appears.
Note
From the SubMenu, if you selected "Play" for the call
history data which has no call recording icon, an error
message appears, and the call recording data cannot
be played.
TIP
To back to the incoming call history screen, press Back
soft key.
Speaker
Play
Back
[Pause]
Start playing by offhook.
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205