234
STEP 4: After a tone indicating the start of playback,
the recorded call will be played.
You can control the playback of a recorded call as fol-
lows:
•Press Top to play the call from the beginning
•Press Stop to finish playing, and go to STEP 5.
•Press Pause to pause playing.
STEP 5: When the playback of the recorded call has
finished, the following message appears.
You can navigate through the recorded calls as follows.
•Press “↑” to display a newer recording data
•Press “↓” to display a older recording data
•Press Back, and a screen switching message appears
on the LCD. Then, go to STEP 6.
•Press Play to play the call recording data again.
STEP 6: Go on-hook or wait for 3 seconds after the
message appears, then, you are back to the
incoming call screen.
Pause
Stop
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Top
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Play has been finished.
Back
Play
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Play has been finished.
Back
Play
A screen is switched over.
Please onhook.
To Next Page
Loading...
