NEC Univerge SV9500 - Page 47

39
STEP 3: Select Incoming Call.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 4: Select Offhook Ring.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 5: To disable/enable the off-hook ringing,
choose Disable or Enable.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press or , and press or OK.
1
1
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
7

Display
Change Password
Peripherals
Usability
Talk
Security
Incoming Call
2
2
OK
Back
1/1
[Incoming Call]
1
2
3
4
5
6

Headset Ring
Ring Tone
Headset Ring Volume
Illumination
Ring Volume
Offhook Ring
TIP
Default setting is Enable.
TIP
The enabled item is highlighted.
1
2
1
2
1
2

1/1
Disable
OK
Back
Enable
[Offhook Ring]