NEC Univerge SV9500 - Page 49

41
STEP 5: To disable/enable the ringing of headset,
choose Disable or Enable.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press or , and press or OK.
• TO SET RINGER TONE
The procedure below shows how to change the ringer
tone for internal call and external call.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 3: Select Incoming Call.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
STEP 4: Select Ring Tone.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
TIP
Default setting is Disable.
1
2
1
2
1
2
Enable

1/1
Disable
OK
Back
[Headset Ring]
1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
1
1
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
7

Display
Change Password
Peripherals
Talk
Security
Incoming Call
Usability
4
4