NEC Univerge SV9500 - Page 84

76
• TO CHANGE PASSWORD
To change an existing password, follow the procedure
below. This password is used for the following
occasions.
• To lock/unlock the telephone.
• To delete the directory data.
• To reset the telephone settings.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 3: Select Change Password.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
STEP 4: Enter the old password.
After entering the old password, press or
Set.
Note
Depending on the System Configuration, the expiration
date of password can be specified. For details, please
contact the system administrator.
1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
4
Note
The initial password is "0000". When changing the
password for the first time, enter "0000" as the old
password.
4
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
7

Peripherals
Security
Incoming Call
Talk

Display
Change Password
Usability
OKCancel
BK
1
[Change Password]
New Pass
Retry Pass
Old Pass
Set