80
STEP 7: When “Remove complete!” is displayed,
Press or OK, and remove the USB de-
vice from the terminal.
• TO SET USABILITY
The procedure below shows how to set the operation of
Help key while pop-up window is displayed.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
STEP 3: Select Usability.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
Note
If the USB device is not removed successfully,
"Remove failure!" appears. In that case, Press or
OK, and do the procedure from STEP 6 again.
OK
[Remove]
Remove complete!
Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
To Next Page
Loading...
